Condenser Tube cleaning Sponge Ball

Celsun Sponge Balls made of Silicone Rubber are in great demand in Power Plants, process industries, Hotels, Hospitals, Commercial Buildings, Mall for online condenser tube cleaning applications. Our Silicone sponge ball available in Gujarat, Ankleshwar, bharuch, Dahej, Surat, Ahmedabad, Gandhinagar, Vadodara, Bhuj, Kutch, Jamnagar, Rajkot, Maharashtra, Mumbai, Pune, Ahmednagar, Akola‎, Amravati‎, Aurangabad, Dhule, Jalgaon‎, Kolhapur‎, Nashik‎, Panvel‎, Solapur‎‎ Nagpur, Madhya Pradesh, Indore, Bhopal, Jabalpur, Gwalior, Satna, Ratlam, Chhindwara, Chhatarpur, Damoh, Andhra Pradesh, Delhi, Bangalore, Telangana, Chennai, Kolkata Visakhapatnam, Hyderabad, Chhattisgarh and all over India.

The Standard Sponge Balls (SSB) also called as non-abrasive balls have porous structure, they are softer and more elastic. They have tendency to absorb water, their surface is coarser, so it can remove dirty stuff easily. Standard balls are used in most condition that has no special requirements. We recommend continuing use these balls for fresh water, water with high TDS and sea water application. For most customers, the standard sponge ball is their first choice. The standard balls offered by us have 5 kinds of different firmness. They are soft, medium soft, medium, mid-firm, and firm.

Item Code








Medium Soft


Medium Hard



160 kg/m3

200 kg/m3

250 kg/m3

300 kg/m3

350 kg/m3

The choice of the firmness of the balls is dictated by the type of the system design, application, operation of the system continuous/batch type, the pressure drop across the heat exchanger etc. The most commonly used sponge balls for cleaning application are ‘Medium’ firmness. Of 250 kg /m3 density.

Ring Carborundum Sponge Balls

Also called as abrasive balls are the sponge balls coated with the ring of hard carborundum material. The carborundum is very hard; it can abrade hard deposits on the inner side of the tubes. So if on your condenser tube there is something stuck on the inner surface and very difficult to remove, the carborundum coated ball is the best choice. But these balls can be harmful for soft tube.

They should ONLY be used in extremely difficult conditions, and they cannot be used continuously or very often. It is recommended not to use these kinds of balls for new equipment, and never use them for brass tube and other soft material tubes. These types of balls should be selected as per the recommendations of online tube cleaning system equipment supplier. These balls are available for the various firmness mentioned above. For ring coated balls coating of 1-2 mm shall be additional to the ball diameter.

The cleaning sponge rubber balls are available in various sizes mentioned below

Celsun Tube cleaning Sponge Balls